Ranger Products R23, Инструкция по установке и эксплуатации

Страница: 18 / 48

18
INFLATION PEDAL OPERATION
The three-position inflation pedal located at the center of
the left side of the machine serves three different functions.
It checks air pressure in the tire; controls the flow of air
through the inflation hose; and operates the “Jet-Blast” bead
sealing nozzles. (See Fig. 1)
Position One - Tire Pressure – With the inflation hose
attached to the tire valve and the pedal in this position, the
air gauge will register the air pressure in the tire. Whenever
your foot is removed from the pedal, it will return to this
position. (See Fig. 2)
Position Two - Tire Inflation – This is the first activated posi-
tion. With the inflation hose attached to the tire valve and the
pedal in this position, line pressure is allowed to flow through
the valve and into the tire for inflation. Tire pressure is not
indicated on the gauge in this position. (See Fig. 3)
Position Three - Bead Sealing – This is the second (pressed
all the way down) activated position. With the inflation hose
attached to the tire valve and the pedal in this position, line
pressure is allowed to flow through the valve and to the “Jet-
Blast” nozzles on the table top for bead sealing. (See Fig. 4)
TIRE INFLATION
The unit is equipped with a pressure limiter/regulator to
assist the operator with proper tire inflation. The pressure
limiter will keep most car and light truck tires from inflating
beyond 60 PSI (smaller tires may reach higher pressures).
It is the operators responsibility to follow all instructions and
to control inflation pressure as specified in these
instructions. (See Fig. 5)
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Do not use the “Jet-Blast” bead sealing nozzles
without a tire and wheel positioned on the table
top. Dirt and debris could be blown into the air with
enough force to injure the operator or bystanders.
Do not use this position to inflate a tire.
Fig. 5
The clip-on air chuck on the end of the inflation
hose and all inflation related components should
be checked weekly for proper operation. DO NOT
USE this machine for tire inflation if any parts are
damaged or appear not in proper working order.