Ranger Products R23, Инструкция по установке и эксплуатации

Страница: 7 / 48

8
(1) Tower — Support for horizontal and vertical slides.
(2) Air Inflation Gauge — Registers tire pressure when
clip-on chuck is attached to valve stem and inflation pedal
is released.
(3) Inflation Pedal — Three position pedal that allows
inflation of tires through air hose and clip-on chuck.
(4) Tower Tilt Pedal — Three position pedal that moves
tower forward and back.
(5) Clamp Control Pedal — Three position pedal that
opens and closes rim clamps.
(6) Bead Breaker Pedal — Controls operation of bead
breaker shoe.
(7) Table Top Pedal — Three position pedal that controls
rotation of table top.
(8) Clamps — Secures wheel to table top for tire changing.
Adjust outward to allow outside clamping of wheels up to
26 inches.
(9) Left Helpers & Support —Includes mount/demount
helpers, slides, cylinder & valve for operation.
(10) Lube Bucket Dispenser — For rubber lubricant.
(11) Combination Mount/Demount Head — Mounts and
demounts tire from wheel.
(12) Slide Adjustment Handle — Adjusts horizontal and
vertical slide assembly for proper horizontal and vertical
positioning of mount/demount head. Locks and unlocks
horizontal and vertical slides and sets correct position to
maintain head/wheel clearance.
(13) Bead Lifting Tool — Used to lift and position tire bead
correctly on mount/demount head.
(14) Bead Breaker Shoe — Pivoting shoe for loosening
tire beads.
(15) Bead Sealing “Jet-Blast” Nozzles — Expands tire
sidewall to bead seat area of rim to seal and allow infla-
tion.
(16) Horizontal & Vertical Slides — Allows correct posi-
tioning of mount/demount head.
(17) Air Tank — Air storage tank for inflation and “Jet-Blast”
bead sealing operation.
(18) Tool-Storage Trays — A convenient place to store
wheel protectors or other tools and accessories.
Note: The parts and procedures shown in this manual include optional equipment
that may not be included on the model of Tire Changer you are using.