RR27T
Range Road Enterprises Ltd
Box 944
Eckville AB T0M 0X0
www.range-road.ca
Page 7
26.) Remove 8 – 10mm Nuts and bolts from edge of large safety cover.
27.) Line up holes in edge of large safety cage with the holes in the side of
the chainsaw cover
28.)Install 8 – 10mm bolts and nuts, tighten
29.) Install Bar Oil Tank onto back of chainsaw safety cover with 13mm nut
30.) Remove 10mm bolt and nut from holder above splitting trough, keep
plastic tube as well
31.) Put large safety cage cover into place, slide through hole in processor
32.) Re-install 10mm Bolt, tubing and nut, snug up lock nut, do not tighten
33.) Remove nut from bar lube fitting, insert hose over barb and snug up
fitting (14mm)
