RR27T
Range Road Enterprises Ltd
Box 944
Eckville AB T0M 0X0
www.range-road.ca
Page 18
Check to make sure nuts are tight on cable clamps
89.) Turn adjusting bolts until conveyor is snug, if belt is too loose drive
pulley will spin without turning belt, if it is too tight a jammed piece of
wood could tear belt
90.) Grease conveyor bearings, 2 at top of conveyor, 1 at bottom
91.) Check engine oil, top up or fill as necessary
92.) Add bar oil
93.) Flush hydraulic tank, pour 2-3 litres of hydraulic oil into tank, then
unscrew drain plug on bottom of hydraulic tank and drain to flush out any
contamination
94.) Make sure all return hoses are run the cleanest way, so they won’t rub
or pull tight, you may have to swap Tee’s or hose positions
95.) Add 26L AW32 hydraulic oil, in cold climates AW22 can be used and in
hot conditions AW46 can be used
96.) Check all bolts, hoses and fittings, including engine mount bolts to
make sure nothing is loose
97.) Add fuel to engine fuel tank, do not fill above red level marker in tank
neck, the tank vents through the cap, if fuel is above this line engine will
not run very well and will stall. Premium fuel is recommended, Farm Fuel
