EcoPro300
Range Road Enterprises Ltd
Box 944
Eckville AB T0M 0X0
www.range-road.ca
47.) Remove the bolt & washer from the end of the swivel bar.
48.) Slide the swivel bar through the mount behind the axle.
49.) Re-install the bolt & washer and tighten.
50.) Install wedge adjustment plate and tighten 2 – 18mm bolts & 19mm
nuts.
51.) Pull the adjuster bar into postion.
52.) Tighten the tensioner bolt until the bar has the tension on it that you
prefer.
53.) Mount the battery ground cable to the 10mm ground bolt on the
engine.
