EcoPro300
Range Road Enterprises Ltd
Box 944
Eckville AB T0M 0X0
www.range-road.ca
75.) Place splitting wedge in unit.
Adjustments to make before starting engine
76.) To adjust the chain tension, loosen these 2 - 13mm bolts.
77.) The chain can now be adjusted to ensure the tension is set
correctly. Proper chain tension is achieved when the chain can be
pulled away from the bar by hand ¼”--
‐
½”. To tighten or loosen the
chain, the two bolts can be loosened using a 12mm wrench. Next, the
allen key bolt can be turned clockwise to tighten or counter--
‐
clockwise
to loosen the chain. The two 12mm bolts can be tightened again to
hold the bar securely.
78.) To adjust the chainsaw actuator tab so it will activate valve when
moved, make sure that the bolt head and valve rocker line up and the bolt
is adjusted to allow chainsaw to engage at the position you want it to.
79.) The safety cage by-pass valve must be adjusted so that when the
cage is closed the plunger is all the way down with no polished surface
showing.
