Rane TTM57mkll, Руководство пользователя

Страница: 12 / 36

OWNER’S MANUAL
12
TTM57mkII
Deck Input Channels
Source
The
SOURCE
selector for
DECK 1
selects one
of four sources:
•
A
Left Virtual Deck (USB stereo
playback pair 1-2) from USB A.
• Assigns MIDI controls for the Left Deck
software and Deck 1 mixer to USB A.
•
PH / CD
(THRU): Set to
PH
or
CD
on the
rear panel.
• When selected in software, this input is
available on USB record 1-2 for use as
the DVS control signal or for audio recording. Select this
control source in the "Deck Inputs 1-2 Control Panel" on
page 20.
•
AUX
(THRU).
• When selected in software, this input is available on
USB record 1-2 for use as the DVS control signal or for
audio recording. Select this control source in the "Deck Inputs 1-2 Control Panel" on page 20.
•
B
Left Virtual Deck (USB stereo playback pair 1-2) from USB B.
• Also assigns the MIDI controls for the Left Deck software and Deck 1 mixer to USB B.
The
SOURCE
selector for
DECK 2
selects one of four sources:
•
A
Right Virtual Deck (USB stereo playback pair 3-4) from USB A.
• Also assigns the MIDI controls for the Right Deck software and Deck 2 mixer to USB A.
•
PH / CD
(THRU): Set to
PH
or
CD
with the rear panel switch.
• When selected in software, this input is available on USB record 3-4 for use as the DVS control signal
or for audio recording. Select this control source in the "Deck Inputs 1-2 Control Panel" on page 20.
•
AUX
(THRU).
• When selected in software, this input is available on USB record 3-4 for use as the DVS control signal
or for audio recording. Select this control source in the "Deck Inputs 1-2 Control Panel" on page 20.
•
B
Right Virtual Deck (USB stereo playback pair 3-4) from USB B.
• Also assigns the MIDI controls for the Left Deck software and Deck 2 mixer to USB B.
Gain
This adjusts the Deck input level from off to +15 dB. Unity gain (no boost or cut) is at 12 o’clock. Each
Deck channel has a mono meter to assist setting gain. These meters are quasi-peak with peak hold. Use
the
GAIN
control to stay out of the red.
Tone Controls and Kill Buttons
HIGH
,
MID
and
LOW
full-cut isolator tone controls adjust the frequency response from off to +6 dB. Unity
gain (no boost or cut) is at 12 o’clock. Each tone control has a kill switch with two modes:
• Pressing a kill button will cut the tone, as if its control is fully off (CCW). Releasing the button returns
the tone to where the control is set. Use this to drop the bass, mid or highs for a moment of suspense.
• Pressing the Shift button before pressing a kill button locks the tone off, and stays off after the kill is
released. Pressing the kill button again removes the kill, unlocking the tone to where its control is set.
• Crossover points for Low/Mid and Mid/High default at 300 Hz between Low and Mid, 3 kHz between
Mid and High. This can be changed for each Deck. See "Deck Inputs 1-2 Control Panel" on page 20
10 0
2
4
8
6
10 0
2
4
8
6
HIGH LOW HIGH LOW
FlexFX FlexFX
GAIN GAIN SOURCE
FILTER FILTER
PH/CD AUX
HIGH
MID
LOW
HIGH
MID
LOW
DECK 2 DECK 1
B A
SOURCE
B A
PH/CD AUX