Rane TTM57mkll, Руководство пользователя

Страница: 21 / 36

OWNER’S MANUAL
21
TTM57mkII
General Control Panel
Main Out
can be set to Stereo or Mono. The Booth and Session Outputs are always in stereo.
Headphone Tone slider adjusts the tone going to the headphones using spectral tilt filters.
• Increasing Treble reduces lows by the same amount.
• Increasing Bass reduces highs by the same amount.
USB AUX Filter Resonance : The USB Aux, usually used with the Serato DJ SP-6 Sampler, has its own
sweep FILTER control that provides a High- and Low-Pass filter effect. Filter resonance controls the
“peak” of the filter cutoff frequency. The Low setting provides the smoothest Filter without adding gain.
The High setting adds accent to frequencies near the Filter cutoff point by adding about 12 dB of gain.
Adding gain in a narrow region around the cutoff frequency adds a “zip” effect to audio as the Filter is
swept. The default is 5 dB.
EQ Kill Switches : determine the button behavior of all six EQ Kill switches.
• Momentary : the switches are configured to stay engaged only while pressed.
• Latching : the switches are configured to toggle the Kill mode on and off with each press.
USB Port Status indicates the connection status of both USB ports. Active indicates a USB connection
between the mixer and a computer. Local shows the USB Port connected to this control panel's
computer.
The Buffer Size control allows the USB buffer to be increased or decreased. This only appears in the
Rane Control Panel for ASIO in Windows. In Mac systems, the buffer control is in the DAW or DJ audio
preferences screen and does not appear here. The Rane driver is designed to run at latencies as low as 5
milliseconds round-trip. However, computer performance and available resources (number of applications
running) may adversely affect the computer’s ability to stream audio reliably. If pops and clicks are heard
in USB audio, try increasing the buffer size to eliminate them. With ASIO, total round-trip latency is equal
to Buffer Size plus device latency. With Core Audio, total round-trip latency is determined by the Buffer
Size set by the DAW/DJ software, plus device latency. Device latency is 3 to 4 ms.