Rane Four, Руководство пользователя

Страница: 11 / 38

11
FX Section
1. FX Display: Shows the current effect
and its parameters.
2. Main FX: Press one of these buttons
to arm a post-fader effect. Press and
hold a button and scroll with the
encoder through the list of effects.
Press the encoder to load the
selected effect.
•
FX Save: Press and hold this button for 4 seconds to save the current
beats/parameter values to the FX slot.
•
Parameter Reset: Press and hold Shift and press this button to recall the
user defined or factory default (if the effect has not been saved)
beats/parameter values for the loaded effect.
3. Effects Toggle: Move this toggle switch away from you to activate the effects—the
toggle will latch to that position. Push down on the paddle to turn the effects on
momentarily. Pull the toggle back to the center position to deactivate the effects.
•
Menu Navigation: While the Menu is open, move the joystick to navigate
through menu options.
•
Beat Value Reset: Push the joystick button to recall the user-defined or factory
default beat value (when the effect has not been saved) for the loaded effect.
4. Tap: Press this button 3 consecutive times at the desired tempo to manually set
the BPM rate for beat-tempo effects, per channel. Press and hold this button for
3 seconds to return the BPM back to BPM of the software deck.
5. Hardware/Software FX Select: Press to toggle between the internal Hardware
FX or software FX. Blue LED = Internal FX (default). Orange LED = Software
FX.
Press and hold Shift and press this button to access the System menu.
6. Parameter Encoder: Turn this to control the hardware FX parameters.
Push the encoder to cycle through available parameters for the assigned effect.
•
Menu Navigation: While the Menu is open, move the joystick to navigate
through menu options.
•
FX Select: Hold one of the 6 FX buttons and turn the encoder to scroll
through the available effects. Push the encoder to load the selected effect.
Press and hold Shift and turn the encoder for Manual BPM Adjust. This will
change the tempo of the selected BPM in tenth increments.
7. Parameter Joystick: Push this joystick up and down to adjust effect parameters
shown on the FX Display. Push this joystick left or right to select the left or right
BPM. This is only necessary when making manual FX tempo adjustments.
•
Menu Navigation: While the Menu is open, move the joystick to navigate
through menu options.
•
Beat Value Reset: Push the joystick button to recall the user-defined or factory
default beat value (when the effect has not been saved) for the loaded effect.
1 2
4
6
7
9
2
3
8
8
5
3