R&S VTE, Начало работы

Страница: 40 / 52

Operating the R&S VTE in a LAN
R&S
®
VTE
40 Getting Started 2116.1270.02 ─ 07
The configuration tasks depend on whether your network has a DHCP server or
not. They are performed in the "Setup" dialog.
For detailed information see the user manual or the help system.
If you are not familiar with LAN configurations, ask your network administra-
tor.
If you use the R&S
mDNS Service, you do not need to configure at all. For
details, see Chapter 6.3, "Zero Configuration Networking" , on page 39.
Networks with DHCP Server
The R&S VTE is preconfigured for networks using the dynamic host configuration
protocol (DHCP). In such networks, the R&S VTE is automatically assigned a free
IP address. Identification in the network is based on the use of a unique computer
name.
Every R&S VTE is assigned an individual computer name at the factory. It is dis-
played as part of the window title of the application.
If necessary, you can change the computer name using the firmware or the Win-
dows
7 Start menu (for details refer to the Windows 7 documentation).
Querying the computer name using the firmware
In the firmware, "host name" is used as synonym for "computer name".
1. If the R&S VTE has a default computer name, the computer name is dis-
played in the title bar of the application.
2. If no default computer name is displayed, do the following.
a) In the toolbar, tap .
b) On the "System" tab, under "LAN Services", select the "Host Name" field.
3. Read out the name.
Naming rule for the default computer name
The default computer name is composed as follows:
<instrument short name>-<serial number>
Example: VTE-100104
Configuring the Network Card