manualshive.com logo in svg

R&S VTE, Начало работы

Поделиться
Скачать
R&S VTE Скачать руководство пользователя страница 10

Safety and Regulatory Information

R&S

®

VTE

10

Getting Started 2116.1270.02 ─ 07

Potential hazard
Read the product documentation to avoid personal injury or product damage.

Electrical hazard
Indicates live parts. Risk of electric shock, fire, personal injury or even death.

Hot surface
Do not touch. Risk of skin burns. Risk of fire.

Protective conductor terminal
Connect this terminal to a grounded external conductor or to protective ground. This

protects you against electric shock should an electric problem occur.

Connecting headphones

Take the following measures to prevent hearing damage. Before using head-
phones, check the volume and reduce it if necessary. If you monitor varying sig-
nal levels, take off the headphones and wait until the signal has settled. Then
adjust the volume.

1.2

 

Labels on the Product

Labels on the casing inform about:

●

Personal safety, see 

"Meaning of safety labels"

 

on page 9.

●

Product and environment safety, see 

Table 1-1

.

●

Identification of the product on the type plate.

Table 1-1: Labels regarding product and environment safety

Labeling in line with EN 50419 for disposal of electrical and electronic equipment after

the product has come to the end of its service life.
For more information, see the product user manual, chapter "Disposal".

Read the manual for information.

Headphone. Take care with the volume setting, see 

"Connecting headphones"

on page 10.

Labels on the Product

Содержание VTE





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды