R&S VTE, Начало работы

Страница: 24 / 52

Preparing for Use
R&S
®
VTE
24 Getting Started 2116.1270.02 ─ 07
The yellow LED at the standby key is illuminated.
2. Press the standby key.
The green LED at the standby key is illuminated.
The R&S VTE starts booting:
● The installed BIOS version and some of the computer features are dis-
played on the screen for a few seconds.
● The Windows 7 operating system is booted, followed by the R&S VTE
firmware.
● A self-test is performed.
After booting is completed, the main screen of the R&S
VTE is displayed, and
the R&S VTE is ready for operation.
The configuration settings that were active before the R&S VTE was last shut-
down are automatically restored.
Use the "File" dialog to load another instrument setting. For details, see the user
manual or the help system.
Activating the power save mode
Power save mode is not set by default for the R&S VTE.
If you do not need the display, you can switch off the monitor in Windows 7.
For details, refer to the Windows 7 documentation.
To shut down the product
The product is in the ready state.
► Press the standby key.
The operating system shuts down. The yellow LED at the standby key is illu-
minated.
To disconnect from power
The product is in the standby state.
1. NOTICE! Risk of data loss. If you disconnect the product from power when it
is in the ready state, you can lose settings and data. Shut it down first.
Set the switch on the power supply to position [0].
The LEDs at the standby key are switched off.
Switching On or Off