Installation
R&S
®
TSVP
7
Getting Started 1152.3943.62 ─ 07
2
Installation
Before putting the unit into operation for the first time, be sure to read and
observe the important safety and operating instructions supplied in the operating
manual.
If the software is not already installed, read the
readme.txt
file in the main
directory of the software package to determine the requirements and the proce-
dure for installing the software.
If your CompactTSVP is equipped with an internal system controller, you can put
the instrument into operation as follows after connecting a monitor, keyboard and
mouse:
1. Switch on the R&S TSVP at the rear.
2. Log on under Windows (no password!).
3. Start the "R&S GTSL TSVP Self Test" in Windows start menu. Details of the
self-test are described in the "Service Manual CompactTSVP and Pow-
erTSVP".
If your CompactTSVP should be controlled by an external computer with help of a
compact PCI bridge solution, you can put the instrument into operation as follows:
1. Install the R&S GTSL package on your computer. See "R&S GTSL Software
Description" for details.
2. Install the bridge module into your computer. Refer the appropriate manual
how to install the PC card and how to connect the components.
3. Connect the CompactTSVP to the computer.
4. Power on the CompactTSVP first.
5. Power on your computer.
6. Start the R&S GTSL "Instrument Soft Panels" application from the start menu.
All installed TSVP modules should be listed in the main window. In the "Tools"
menu use the option "Create Physical.ini…" to automatically generate the
configuration file. See "R&S GTSL Software Description" for details.
7. Start the "R&S GTSL TSVP Self Test" application from the Windows start
menu. Details of the self-test are described in the "Service Manual Com-
pactTSVP and PowerTSVP".
