Product Overview
R&S
®
TSVP
23
Getting Started 1152.3943.62 ─ 07
at front and at rear I/O section (diverted using an optional TS-PRIO3 rear I/O
module)
●
8 switching channels max. 2A , 30 V DC, 46 V AC peak;
Shunt resistors with 0.022
Ω
for current measurement via analog bus availa-
ble
3.3.15
R&S TS-PSM4
The High-power Switch Module R&S TS-PSM4 is intended for the R&S Com-
pactTSVP and R&S PowerTSVP test platform. The module occupies one slot.
Control of the module is via the CAN bus. The module is available in two ver-
sions:
●
It can be ordered with a connector of the Virginia Panel Corp. (VPC) on the
front of the module as R&S TS-PSM4 (variant 03, R&S order no.
1519.2622.03). The connector is connected to the individual channels of the
module via terminals on the base board using a pre-assembled cable set
●
The R&S TS-PSM4B (variant 02, R&S order no. 1519.2622.02) is delivered
without VPC, the user can connect his loads or power supply units with his
own cables via apertures on the front plate of the module to the terminals of
the channels.
It offers the following key features:
●
12 high power channels up to 16 A and 30 V DC
●
Shunt resistors with 0.005
Ω
per path for current measurements via analog
bus
●
Short circuit switch withup to 16A per channel for test purposes; access avail-
able at front connector and rear I/O connection with a TS-PRIO2 module
●
8 high power channels up to 2 A , 30 V DC, 46 V AC peak Shunt resistors with
0.022
Ω
per path for current measurements via analog bus; access available
at the front connector and rear I/O connection using a TS-PRIO2 module
3.3.16
R&S TS-PSM5
The High-power Switch Module R&S TS-PSM5 is intended for the test platform
R&S CompactTSVP and R&S PowerTSVP. The module occupies two slots. Con-
trol of the module is via the CAN bus. The module is available in two versions:
Test Modules
