Product Overview
R&S
®
TSVP
11
Getting Started 1152.3943.62 ─ 07
Used for R&S TS-PSU and power supplies with IVI compliant device drivers
and for control of internal and external power supply units
●
DIOMGR.DLL
, Digital I/O Manager
Used for R&S TS-PDFT, R&S TS-PIO3B, TS-PIO4, TS-PIO5 and modules
using „IVI digital“ compliant device drivers.
Allows the creation of digital i/o bus topologies including more modules and a
digital pattern configuration
●
DMM.DLL
, Digital Multi-meter
Used for R&S TS-PSAM and devices using „IVI DMM“ compliant device driv-
ers Allows the configuration and execution of analogue measurements (DCV,
ACV, DCC,ACC, resistor)
●
FUNCGEN.DLL
, Function Generator
Used for R&S TS-PFG and devices using „IVI generator“ compliant drivers
Allows the creation of usual signals as sine, rectangle, triangle, the creation of
arbitrary waveforms and the handling of sequences
●
SIGANL.DLL
, Signal Analyzer
Used for R&S TS-PAM and devices using „IVI scope“ compliant drivers
Allows the creation of WFA measurements and the readout of data and mea-
surement results
●
RSMGR.DLL
, Resource Manager
Used for adminstration functions for any hardware defined in the
PHYSICAL.INI
file
●
ROUTE.DLL
, Signal Routing
Used for supporting functions for complex path management
Includes any switching module
NOTE:
Not in combination with
SWMGR.DLL
●
SWMGR.DLL
, Switch Manager
Used for supporting functions for switching of single paths at single modules
NOTE:
Not in combination with
ROUTE.DLL
●
ICT.DLL
and
ICCHECK.DLL
, In-Circuit Test
Used for supporting functions for In-Circuit and IC-Check test methods
●
FTBLIB.DLL
, Factory Toolbox
Used for supporting functions for R&S TS-PIO3B and extensions
●
SFT.DLL
, Self Test Support
Used for controlling functions for the execution of TSVP modules self test
Software Components
