Product Overview
R&S
®
TSVP
15
Getting Started 1152.3943.62 ─ 07
The R&S TS-PICT module can only be used in the R&S CompactTSVP and
only in combination with the R&S T-PSAM module. It requires a R&S TS-
PDC at the assigned rear I/O slot.
3.3.3
R&S TS-PDFT
The Digital Function Test Module R&S TS-PDFT is for use wherever simple or
complex digital circuits are tested or programmed by static or dynamic stimula-
tion/recording/ communication.
It offers the following key features:
●
Output
– 32 digital output channels in 4 groups and 8 bit/group configurable
– Output voltage : -3V to +10 V configurable in 4 groups and 8 bit/group
– TTL mode: 0.8V / 2.5V / 3,3V volt up to 80 mA current per channel
– Sample rate max. 20 MHz with 25 ns Resolution
●
Input
– 32 digital input channels in 4 groupes and 8 bit/group configurable
– Input voltage: -5 V to +12 V
– Availbale input modes: hysteresis and comparator
– Sample rate max. 20 MHz with 25 ns resolution
– Input protection: max.
±
42 V
The R&S TS-PDFT module can only be used in the R&S CompactTSVP.
3.3.4
R&S TS-PFG
The Function Generator Module R&S TS-PFG can be used wherever single or
multiple channel analog output signals have to be simulated.
It offers the following key features:
●
Two floating Outputs
●
AC 1 Hz to 1 MHz, DC-mode possible (DC - Source mode)
● ±
20 V Output voltage, can be cascaded up to
±
40 V
Test Modules
