![background image](http://html1.mh-extra.com/html/rands/smw-k555/smw-k555_user-manual_3082948029.webp)
Bandwidth Extension settings
R&S
®
SMW-K555
29
User Manual 1179.5776.02 ─ 01
The "Bandwidth Extension" side-tab provides general settings to configure settings
of the bandwidth extension setup. Also it provides access to settings for setup
alignment.
Settings:
.................................................................................... 30
State
Activates bandwidth extension.
Activation requires a loaded bandwidth extension setup file, see
Remote command:
:SCONfiguration:BEXTension:STATe
Setup
Accesses a standard file-select dialog to load and save a configuration of a bandwidth
extension setup.
If a setup file with extension
*.bwsa
is loaded, the button also displays the filename.
The setup file is an archive file containing setup description file (
*.xml
) and the cor-
rection files (
*.ucor
and
*.asc
).
Remote command:
:SCONfiguration:BEXTension:SETup:FILE
Info / Align
Accesses the "Setup Info / Align" dialog that provides information on alignment param-
eters of the bandwidth. See
Chapter 4.3, "Setup info and alignment settings"
The alignment procedures include power level corrections and consider cable length
corrections. The procedure duration can take several minutes and depends on fre-
quency range and level range of the combined RF output signal.
In the current firmware, you can align the two internal baseband signals of path A and
path B of the R&S
SMW.
Remote command:
:SCONfiguration:BEXTension:ALIGn:STATus?
Setup info
Displays information on the loaded bandwidth extension setup in a block diagram.
General settings