![background image](http://html1.mh-extra.com/html/rands/smw-k555/smw-k555_user-manual_3082948021.webp)
Extending the bandwidth
R&S
®
SMW-K555
21
User Manual 1179.5776.02 ─ 01
The hostname of the signal analyzer is added automatically.
6. To add the signal analyzer manually, proceed as follows:
a) Select "Instrument" > "New".
b) Specify hostname or IP address of the signal analyzer.
c) Optionally, add a comment to document accessories in your setup: Power
combiner, directional coupler, etc.
7. To verify your test setup, select "Next".
The dialog displays a preview of the test as configured in test setup file editor. In
the figure below, no coupler is active in the test setup.
8. Select "Align Setup".
Selection triggers the actual setup alignment procedure. The R&S
SMW displays
the "Busy" in the status bar.
Configuring the R&S
SMW