Remote-Control Commands
Satellite Navigation
207
User Manual 1178.6379.02 ─ 01
MMEM:CDIR '/var/user/settings'
SOURce1:BB:GNSS:SETTing:CATalog?
// Response: gnss_settings,settings
SOURce1:BB:GNSS:SETTing:STORe '/var/user/settings/gnss'
SOURce1:BB:GNSS:SETTing:LOAD '/var/user/settings/gnss_settings'
SOURce1:BB:GNSS:SETTing:DELete '/var/user/settings/settings'
// Deletes the file settings.gnss
SOURce1:BB:GNSS:SETTing:CATalog?
// Response: gnss_settings,gnss
Example: Selecting a predefined test scenario
This example shows how to enable a predefined scenario.
**********************************
// Select and enable the predefined test scenario
// 3GPP FDD Signaling Test Scenario 2
// ****************************************
SOURce1:BB:GNSS:PRESet
SOURce1:BB:GNSS:SETTing:CATalog:PREDefined?
// Assisted GNSS+EUTRA/LTE+3GPP TS 37.571-2: S7 Signaling ST1;
// 3GPP TS 37.571-2: S7 Signaling ST2;...
SOURce1:BB:GNSS:SETTing:LOAD:PREDefined "3GPP TS 37.571-2: S7 Signaling ST2"
SOURce1:BB:GNSS:SCENario?
// "Predefined: 3GPP TS 37.571-2: S7 Signaling ST2"
SOURce1:BB:GNSS:TMODe?
// NAV
SOURce1:BB:GNSS:SIMulation:INFO?
// "L1 / GLONASS only"
SOURce1:BB:GNSS:STATe ON
................................................................................. 207
...................................................................................208
[:SOURce<hw>]:BB:GNSS:SCENario?
............................................................................ 208
................................................................................. 208
[:SOURce<hw>]:BB:GNSS:SIMulation:INFO?
...................................................................209
[:SOURce<hw>]:BB:GNSS:SETTing:CATalog?
.................................................................209
[:SOURce<hw>]:BB:GNSS:SETTing:STORe
.................................................................... 209
[:SOURce<hw>]:BB:GNSS:SETTing:LOAD
...................................................................... 209
[:SOURce<hw>]:BB:GNSS:SETTing:DELete
.................................................................... 210
[:SOURce<hw>]:BB:GNSS:SETTing:CATalog:PREDefined?
.............................................. 210
[:SOURce<hw>]:BB:GNSS:SETTing:LOAD:PREDefined
....................................................210
[:SOURce<hw>]:BB:GNSS:PRESet
Sets the parameters of the digital standard to their default values (
*RST
values speci-
fied for the commands).
Not affected is the state set with the command
SOURce<hw>:BB:GNSS:STATe
.
General Settings