R&S SMW-K106, Руководство пользователя

Страница: 209 / 455

Remote-Control Commands Satellite Navigation
209 User Manual 1178.6379.02 ─ 01
[:SOURce<hw>]:BB:GNSS:SIMulation:INFO?
Queries information on the current enabled RF bands, signals and GNSS standards.
Return values:
<SimConfigInfo> string
Example: See Example "Selecting a predefined test scenario"
on page 207.
Usage: Query only
[:SOURce<hw>]:BB:GNSS:SETTing:CATalog?
Queries the files with settings in the default directory. Listed are files with the file exten-
sion
*.gnss
.
Return values:
<FileNames> <filename1>,<filename2>,...
Returns a string of filenames separated by commas.
Example: See Example "Save/Recall files with user settings" on page 206.
Usage: Query only
Manual operation: See "Save/Recall Scenario" on page 24
[:SOURce<hw>]:BB:GNSS:SETTing:STORe <Filename>
Saves the current settings into the selected file; the file extension (
*.gnss
) is
assigned automatically.
Setting parameters:
<Filename> "<filename>"
Filename or complete file path
Example: See Example "Save/Recall files with user settings" on page 206.
Usage: Setting only
Manual operation: See "Save/Recall Scenario" on page 24
[:SOURce<hw>]:BB:GNSS:SETTing:LOAD <Filename>
Loads the selected file from the default or the specified directory. Loaded are files with
extension
*.gnss
.
Setting parameters:
<Filename> "<filename>"
Filename or complete file path; file extension can be omitted
Query the existing files with the command
[:SOURce<hw>]:
BB:GNSS:SETTing:CATalog?
.
Example: See Example "Save/Recall files with user settings" on page 206.
General Settings