Real-World Environment
Satellite Navigation
89
User Manual 1178.6379.02 ─ 01
Try out also the following:
1. In the "Antenna Configuration" dialog, select "3D View > On".
2. Select "Display > Antenna Pattern (Power)/(Phase)" to visualize the power and
phase response.
3. Select "Display > Position" to visualize the antenna's orientation and location com-
pared to the center of gravity (COG).
Automotive applications
Extract the attitude parameters from the waypoint file as follows:
1. Select "Receiver > Position > Moving".
2. Select "Position Configuration > Attitude Behaviour > From Waypoint File".
Settings
Simulation Configuration > Receiver > Number of Antennas
........................................89
........................................................................................ 90
............................................................................................... 91
Delta Heading, Delta Elevation, Delta Bank
..................................................................91
Edit > Body Mask/Antenna Pattern File
........................................................................ 91
Azimuth, Elevation, Power Loss, Phase Response, Resolution
Simulation Configuration > Receiver > Number of Antennas
Defines the number of configurable antennas.
You can create a pool of up to four antenna and body masks and switch between
them. To define which antenna is simulated, set "A#" >
.
Note:
Switching between the active antenna restarts the simulation.
Remote command:
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:ANTenna:COUNt
Display
Select the antenna characteristics that are currently visualized.
If more than one antenna is enabled (e.g. "Receiver > Number of Antennas = 2"), the
displayed information corresponds to the currently selected one ("A# > Active > On").
The graph is merely a visualization. To change the values, select "A# > Filename >
Select Antenna Pattern File > Predefined/User Files" >
"Edit"
.
Antenna Configuration Settings