R&S OSP
Getting Started
Operating Manual 1505.3896.12 - 14
45
taken over into a path configuration.
Pressing the Shift key while clicking on a relay button will toggle between selecting all
relays of this module and deselecting all of them.
Relay configuration
OSP-B101 dialog
When the dialog for operation of the R&S OSP-B101 module is opened, the actual
relay setting of this module is read back from the hardware and displayed.
The dialog as described above applies to further options of the R&S OSP as far as the
option has got a similar relay configuration. It will apply to the following modules:
Option
Relay configuration
OSP-B106
3 x SPDT relay with N connectors, 12 GHz,
3 x SPDT relays with BNC connectors, 900 MHz / 2 A
OSP-B107
6 x SPDT relay, solid state, 6 GHz
OSP-B111
6 x SPDT relay, 40 GHz
OSP-B127
6 x SPDT relay, solid state, terminated, 10 GHz
OSP-B132
6 x SPDT relay with N connectors, 12 GHz
Relay numbering
Please note that for the module OSP-B106 the relays are numbered from K1 to K6 but
from K11 to K16 for all other modules.
3.3.7 Controlling the R&S OSP-B102/-B112/-B128
After selection of the R&S OSP-B102 module the following dialog is opened.
The module R&S OSP-B102 contains two RF switches of SP6T type, which is shown
in the OSP-B102 dialog.
