R&S OSP
Instrument Functions
Operating Manual 1505.3896.12 - 14
130
If any paths are defined for the R&S OSP, they are listed under [Path List].
The name of the path is indicated together with the relay setting related to the path.
Close the Notepad to exit the system info utility.
System Info:
The text file containing the System information is stored with the file name
ospSystemInfo.txt in the installation directory of the OSP Panel (default directory:
C:\OSP Panel).
Each time the system info utility is started at the OSP Panel, this file is overwritten with
the actual data.
5.7 SCPI Read/Write
As an additional feature, the OSP Panel allows a direct communication with the
R&S OSP via SCPI commands. This additional feature is foreseen for debug purpose
and requires to be familiar with SCPI commands of the R&S OSP. Refer to the section
on remote control (
chapters 6
of this manual) for further information.
For direct communication with the R&S OSP via LAN interface proceed as follows:
1.
Start the OSP Panel.
2.
Select
>Utility >Read/Write
… in the OSP Panel.
The following dialog will appear:
