22
RAMI
CSS300
INTRODUCTION
INFORMATIONS
The CSS300 is a device for continuously monitoring the presence of audio in the AES channels of an SDI link. In the event
of a problem, it automatically reads a personalized alarm message on the dedicated audio outputs and generates an
SNMP notification. Once the problems are resolved, playback is automatically stopped. The outputs of the alarm signal are
in digital and analog format.
Balanced analog audio outputs on XLR
Digital AES/EBU output on transformer.
Alarm message recorded on an internal SD card.
Supervision by SNMP (V2c and V2c Inform).
System Log of 200 lines of events.
A monitoring part allows the user to control AES inputs on headphones and visually on a peakmeter.
The CSS300 supports SDI SD, HD and 3G formats.
Digital carrier monitoring for quality and audio, adjustable from -60dBFs to 0 dBFs. On audio loss CSS300 goes on alarm after
adjustable delay.
Four audio monitoring modes Left, right, Left + right, left and right.
Full management of the unit uses the embedded web server. It keeps record of the last events, of frames informations in real
time.
A front panel switch recall the factory IP address and a USB port is used for firmware update.
Warning !
CSS300 mains connectors have three wires (2 poles + earth). Earth should imperatively be connected to mains earth.
Never use this equipement without proper grounding.
Check quality of grounding.
Never open the case without disconnecting mains
Avoid high temperature exposure.
Never expose the equipment to rain, snow or moisture.
CSS300 complies with :
EN60065, EN55013, EN55020, EN60555-2, and EN60555-3, according to 73/23/EEC, 89/336/EEC and 93/68/EEC.
Содержание CSS300
Страница 2: ...2 RAMI CSS300...
Страница 20: ...20 RAMI CSS300...
