RAM CSS300, Руководство пользователя

Страница: 31 / 38

31 RAMI CSS300
Parameter Check box Value Comment
Clip Threshold Enable/disable
0 ~ -12 Threshold in dBFs
2. ClipThreshold
The CSS300 incorporates a calculating unit that determines the RMS level of the audio signal for both left and right
channels. The CLIP threshold filter, if enabled , ensures that this level will not exceed the defined threshold. Otherwise it
will automatically trigger an audio alarm. The threshold is adjustable from -12dBFs to 0dBFs in steps of 1dB. The alarm
produced is of the Audio type.
3. Alarm Delay
This setting defines the time from when a problem is detected to the time the CSS300 goes to "ALARM". Obviously, if
the problem disappears during this time interval, the CSS300 will not take it into account.
Value Parameter Comment
1 ~ 180 Delay in seconds
Alarm delay
4. Reset Delay

This parameter sets the time between the time the problems disappear and the time the CSS300 cancels the alarm and
returns to the main source. If a problem reappears during this interval, the CSS300 will remain in "ALARM".
Value Parameter Comment
1 ~ 180 Delay in seconds
Reset delay
5. Audio Mode
CSS300 has 4 audio control modes:

Left or Right, monitoring is performed on both audio channels. If a problem occurs on one of the left or right
channels, the CSS300 goes to "ALARM".

Left and Right, monitoring is also performed on both audio channels. On the other hand, there must be a problem on
both left and right channels to change the CSS300 to "ALARM".

Left, monitoring is only performed on the left channel.

Right, the monitoring is performed only on the right channel.
When an audio control mode is selected,
the button changes color and turns blue.
Only one mode can be active at the same time.
WEB INTERFACE - next -