WisLink-Cellular RAK2011
V 1.0 | Aug. 2018
Author:
Gan, Penn
Approval:
Ken Yu
25
of
28
6. After setting, send AT + CSQ to check network signal strength, if there is a signal value, it indicates that it has
connected to NB-IoT network. You can also send AT + CGREG? to check the connection status of the network
to determine whether to connect to the network:
7. After connecting to the network, you need to set up the APN and activate the APN network. You can set the
APN by sending the following commands; (For command details, please refer to Quectel BG96 TCP (IP) AT
Commands Manual)
AT+QICSGP=1,1,"CTNB","","",1
// Set APN parameters
AT+QIACT=1
// Activate APN
AT+QIACT?
// Query the APN assigned IP address
