WisLink-Cellular RAK2011
V 1.0 | Aug. 2018
Author:
Gan, Penn
Approval:
Ken Yu
12
of
28
2.11 USB Boot Jumper
A Standard 1x2 USB Boot header (once closed) is
used to force BG96 LPWA IoT Cellular Arduino Shield
to boot from USB port for firmware upgrade.
2.12 PWRKEY Push Button
PWRKEY push button is used to turn on/off the
BG96 module. To turn on the BG96 module,
push PWRKEY button for at least 100ms.
STATUS pin from Arduino header will output
HIGH.
To turn off the BG96 module, push PWRKEY
button for at least 650ms. STATUS pin from
Arduino header will output LOW.
2.13 RESET Push Button
RESET push button is used to reset the BG96
module. To reset the BG96 module, push
RESET button between 150ms and 460ms.
2.14 LEDs
Three LEDs are used to indicate operating
status. The table below lists their detailed
functions:
GREEN:
STATUS
- indicates module operation
status.
BLUE:
NETLIGHT
- indicates network activity status.
RED:
Power ON
- indicates power status.
