WisLink-Cellular RAK2011
V 1.0 | Aug. 2018
Author:
Gan, Penn
Approval:
Ken Yu
22
of
28
4.
Usage Model by Interface
4.1 User USB Interface
4.1.1
Install USB Driver
If it is the first time to connect BG96 LPWA IoT Cellular Arduino Shield to a Windows PC, install the BG96 USB driver
first. The driver can be downloaded from:
https://www.rakwireless.com/en/download/Cellular/WisLTE
After the Windows USB drive installation is complete, connect BG96 LPWA IoT Cellular Arduino Shield to a PC via a
Type A to Micro B USB cable. Open Windows’ Device Manager and it will show the following under Ports (COM &
LPT):
4.1.2
Send AT Commands
Select Quectel USB AT Port corresponding to the COM port, then open the serial port tools like shown on the
screenshot.The tools can be downloaded at:
