RAK WisGate Edge Pro RAK7289, Быстрый старт

Страница: 12 / 13

Documentation Center
Figure 20: Enable client Wi-Fi interface
📝
NOTE
Assuming you have entered the correct parameter values, you should get an IP address assigned by your
Wi-Fi router's (AP) built-in DHCP server. You can use this new IP address to log in via a web browser (the
same way as in AP mode).
Connect Through Ethernet/PoE
Figure 21: Accessing the Internet through Ethernet
1. Connect the Ethernet cable to the port marked ETH on the gateway and the other end to the PoE port of the
PoE injector.
2. Connect the LAN port of the PoE injector to your router. The router's DHCP server should assign an IP Address
to the gateway.
3. Now, you can access the assigned IP to access the gateway.
Last Updated: 7/29/2022, 10:17:19 PM