Documentation Center
Figure 14: Web UI login page
WAN Port (Ethernet)
1. Connect the Ethernet cable to the port marked ETH on the gateway and the other end to the PoE port of the
PoE injector. Connect the LAN port of the PoE injector to your PC.
Figure 15: Accessing the gateway via WAN Port (Ethernet)
2. The default IP is 169.254.X.X, where the last two segments are mapped from the last four bits of the MAC
address of your gateway. For example, the last four bits of the MAC address are 0F:01 and the IP address is
169.254.15.1. Make sure to manually set the address of your PC to one in the same network (for example
169.254.15.100).
3. To do this, open the head to the Ethernet Properties and click the Internet Protocol Version 4 (TCP/IPv4).
Содержание WisGate Edge Pro RAK7289
Страница 13: ......