Documentation Center
In this section, several ways of accessing the gateway are provided to have different alternatives for you to choose
from depending on the availability of the requirements needed.
⚠
WARNING
Do not power the device if the LoRa Antenna port has been left open to avoid potential damage to the
RAK7268V2/RAK7268CV2 WisGate Edge Lite 2.
Wi-Fi AP Mode
By default, the gateway will work in Wi-Fi AP Mode, which means that you can find an SSID named
RAK7268_XXXX on your PC's Wi-Fi Network List. XXXX is the last two bytes of the gateway's MAC address. To
access the Web Management Platform, input the IP Address: 192.168.230.1 in your Web browser.
📝
NOTE:
No password is required to connect via Wi-Fi
Figure 3: Accessing the gateway via Wi-Fi AP mode
WAN Port (Ethernet)
1. Connect the Ethernet cable to the gateway port marked ETH and the other end to your PC.