RAK WisGate Edge Lite 2 RAK7268V2, Быстрый старт

Страница: 8 / 9

Documentation Center
Figure 10: Accessing the gateway via Wi-Fi AP mode
For additional information, check the WisGateOS 2 User manual.
Figure 11: Connect through Wi-Fi credentials
2. You can either click the Scan button to choose your ESSID or manually type the ESSID of the network by
clicking enter network (E)SSID manually.
3. Select the right Encryption method and enter the correct Key.
📝 NOTE:
Assuming you have entered the correct parameter values you should get an IP address assigned by your
Wi-Fi router's (AP) built-in DHCP server. You can use this new IP address to log in via a web browser (the
same way as in AP mode).
Connect through Ethernet
1. Connect the Ethernet cable to the port marked ETH on the gateway and the other end to the router. The router's
DHCP server should assign an IP Address to the gateway.