Raise3D
Pro3 Series Printer
Declarations and Safety Statements
8
1. Installation
To facilitate operation and maintenance, maintain a proper distance of 50cm on the side of the
printer, 80cm on the front, 20cm on the back, and 60cm on the top during installation. No
flammable materials are allowed around the installation location.
Note:
During low-temperature transportation, the printer may encounter frost or icing hazards.
The printer can be stored at room temperature for 4-6 hours before operating.
2. Filament and Electrical Precautions
It is strongly recommended to use Raise3D official filaments and/or default settings for better
performance. The Raise3D printer is designed with strong compatibility with Raise3D official
filaments. Be extremely careful when printing with unverified filaments and settings to prevent
abnormal printing results or damaging the printer.
Warning:
The printer belongs to EN55032 Class A. In a residential environment, the printer may
cause radio interference.
3. Odor
The printer emits a thermoplastic smell when in operation.
Note:
Place the printer in a well-ventilated and dry environment.
Oil in the air accumulating inside the printer may damage plastic parts.
Air in a cavity with
excessive solid particles (conductive or non-conductive) may cause damage to the printer.
