Raise3D
Pro3 Series Printer
Safety Precautions
4
Do not sit on or lean against the appliance door.
Do not place any objects on the appliance door.
▪
Reaching into the chamber while the three-axis system is still moving may cause hand injuries.
Wait for the three-axis system to come to a complete stop before reaching inside.
▪
The spatula provided in the accessory box has sharp parts. If the spatula is used improperly,
the user may be injured.
Do not touch the edge of the spatula.
Keep children away from the spatula.
▪
Some parts in the printer are sharp and may cause injury.
▪
When removing the printing model, please refer to Section I. Remove the Printed Model.
CAUTION - Risk of burns!
▪
When operating or printing at high temperatures, the shell of the appliance becomes hot.
Do not touch the build plate when the printer is heating up.
Please wear the heat-insulating gloves provided in the accessory box for operation.
Please keep children away from the heated build plate.
▪
The temperature of the extruder is very high when it is printing.
Please do not touch the extruder when it is heating.
Please wear the heat-insulating gloves provided in the accessory box for operation.
Please keep children away from the heated extruder.
Safe Maintenance
Take note of the safety instructions when performing maintenance work on the appliance.
WARNING - Risk of electric shock!
▪
Repairs to the appliance should only be carried out by trained specialist staff.
Only use the manufacturer's original spare parts and original accessories when repairing the
appliance.
If the power cord of this appliance is damaged, it must be replaced by the manufacturer, the
manufacturer's Customer Service or a similarly qualified person in order to prevent any risk.
▪
An ingress of moisture can cause an electric shock.
Do not use steam cleaners or sprays to clean the appliance.
WARNING - Risk of injury!
▪
The use of non-original spare parts and non-original accessories is dangerous.
Only use the manufacturer's original spare parts and original accessories.
