Raise3D
Pro3 Series Printer
Dual Extruder Printing-Loading
24
After loading filament to the left extruder, select
“Utilities” at the bottom of the screen, and set the
left nozzle temperature to the appropriate printing
temperature for the filament you are using.
For example, the default loading temperature of
Raise3D Premium PLA is 215°C. Here, the left
nozzle temperature can be set to 215°C.
Note:
Generally, the recommended loading and
unloading temperature of the filament should be
5-10°C higher than the printing temperature.
Click “Load”, and the printer will start heating.
When the printer reaches the target temperature,
click “Load” button to load the filament.
Note:
The instructions are based on the
properties of Raise3D Premium PLA filament.
This is the standard filament included with your
printer and we recommend using Raise3D
Premium PLA for testing and initial setup.
The extruder gear will start to rotate. Gently push
the filament into the extruder by hand. When the
filament is extruded out from the nozzle, click “OK”
to complete the loading. Insert the guide tube back
into the quick connector.
4.
5.
