Rain Master RME EAGLE, Руководство пользователя

Страница: 62 / 168

Rain Master Irrigation Systems RME EAGLE User Manual
Chapter 5 Function and Execution Key Operations Page 55
5.9 REVIEW FUNCTION KEY
Usage:
A unique feature of the RME EAGLE controller is its REVIEW feature. At the press
of a key, all program related information will be displayed. Each press of the
REVIEW key will advance to the next program parameter. Another way of
reviewing program information is to press and hold the REVIEW key; the
information will automatically advance at a readable rate. Removing your finger
causes the information scrolling to stop. Pressing QUIT at any time will return the
controller to the Automatic Mode.
The information review will start with the last program selected by the use of the
PROGRAM function key and will continue until all information in Program 4 has
been presented. As an example, if Program 1 was the last selected program then
information in Program 1 will be displayed first, followed by Program 2, 3 and 4. If
Program 3 was the last selected program then information in Program 3 will be
displayed first, followed by the information in Program 4.
The information is presented as follows:
1. The Total Watering time of the program is displayed. This is the actual watering time of the
program and takes into account all factors including the percentage adjust, any delay time
between stations (which is configured using SETUP) and any adjustments due to the
program being a Cycle and Soak program.
The displayed value is rounded up; for instance a total time of 2 hours, 12 minutes and 14
seconds will be displayed as 2 hours and 13 minutes. The display will momentarily display
TOTAL, then the watering time in hours and minutes.
2. If the flow feature was enabled, using the SETUP feature; the total gallons of water used
will be displayed next.
REVIEW
TOTAL
PROGRAM
04H 30M
PROGRAM
TOTAL
PROGRAM
GALLONS
PROGRAM
3400
PROGRAM