Rain Master RME EAGLE EG Series, Руководство пользователя

Страница: 61 / 132

Rain Master Eagle User Manual 6.0 Setup Key Operations
- 55 -
6.2 MASTER VALVE (MV)
This feature allows you to program a Master Valve to be activated when program 1, 2, 3 or 4 is
activated. If you use a pump and it is connected to the Master Valve output of the controller, then
use this feature to activate the pump when program 1, 2, 3 or 4 is activated.
EXAMPLE : The pump is to go on when Programs 1 and 3 are running.
Press:
SETUP
Until display indicates:
mv 1234
Press:
ENTER
Removes Programs 2 and 4 from the
Master Valve Configuration.
Display will indicate:
mv 1 3
Subsequent presses of DATA ENTRY keys 2 and 4 would add Programs 2 and 4 back into the
Master Valve configuration.
The Master Valve will not be activated with the program if it is a Normally Open
Master Valve type as selected in the next Setup option.
6.3 TYPE OF MASTER VALVE
This feature allows you to select either a Normally Closed or Normally Open Master Valve. A
Normally Closed Master Valve is the most common type of valve used in irrigation. If a Normally
Open Master Valve is selected then it will not come on with any program but will come on when
the controller detects a main line or unscheduled overflow condition.
Selection of the Master Valve Type will be skipped if you have not selected a Master
Valve for at least one program (in the MASTER VALVE SETUP function). In this case
the controller will act as if you had selected a Normally Closed Master Valve. If you are
using a Normally Open Master Valve select the Master Valve for at least one program.
Refer to wiring diagrams and explanations in the MOUNTING & INSTALLATION
section before configuring this option.
EXAMPLE : To select a Normally Open Master Valve,
Continue to press:
SETUP
Until display indicates:
type-nc
Press:
The 1 key acts as a toggle when used in
this setup configuration item.
Display will indicate:
type-no
Press: ENTER QUIT
The controller will return to the Automatic Mode.