Rain Bird MDC2, Инструкция по эксплуатации, Страница: 67 / 124

Using the Controller with a PC,
continued
61
Verifying the Time and Date
Once you establish a communication link between
the controller and PC, you then need to verify the
controller’s time and date. Time and date directly
affect irrigation
Schedules
. If either is incorrect, the
irrigation Schedules are also incorrect.
1. From the
Rain Bird Remote Access
window,
select
Controller
.
2. Select Get Set Time/Date from the pull-down
menu to reach the Edit Controller Time
pop-up window. This can be set up for either US
or international (24-hour) time formats.
3. Select
Get Controller Time
and verify that
the
Controller Time
matches
Time is (
PC time).
4. If necessary, adjust the date and time and select
Send time to Controller .
5. Select OK once the two times match.
Controller Status Observation
You can get information about the current status of
the controller, including the
Start
and
Stop
times
of the Current and Next Schedule , Total Current
Flow, Total Expected Flow
, and
Sensor Status
.
1. From the Rain Bird Remote Access window,
select Controller and then Controller
Status . You will be presented with the status
information retrieved from the controller as seen
below.
Note : While the PC is retrieving status data from
the controller, the Communications Status pop-up
window appears visually showing the progress. The
window disappears once the status data is retrieved.
Selecting
Disconnect
from the
Controller
pull-
down menu disconnects the PC connection to
the Controller.