Rain Bird MDC2 Скачать руководство пользователя страница 15

Страница: 15 / 124

Mounting the Controller on the Wall

Note:

The MDC2 Controller has four mounting holes

on the back on the cabinet—three keyhole slots
near the top and one circular hole at the bottom.

Note:

To install the controller on a flat wall surface,

use the left and right keyhole slots at the top of the
cabinet. To install the controller on a narrow stud,
use the center keyhole slot.

1. Place the mounting template onto your

mounting surface. Make sure it is level and
mark the top drill holes. If mounting to a stud,
mark the drill hole in the center of the stud.

2. Drill the holes and use the appropriate plugs

or fasteners.

3. Screw in the appropriate mounting screws,

leaving about 3/8” between the screw heads and
wall.

Note:

The mounting materials and specific screws

you need will vary according to the mounting
surface (i.e., wood, cement, masonry, drywall, etc.)

4. Slide the MDC cabinet over the top screws.
5. If mounting to a stud, swing open the cabinet

door and faceplate. Mark the position of the
bottom drill hole and then lift off the controller.
Do not attempt to drill the bottom hole through
the cabinet.

6. Drill the bottom hole and remount the cabinet.
7. Secure the bottom of the cabinet with a screw,

tightening it all the way.

Installation,

continued

WALL

Содержание MDC2





























































































































Результаты поиска

Содержание MDC2

Отзывы:

Rain Bird MDC2, Инструкция по эксплуатации, Страница: 15 / 124

Результаты поиска

Содержание MDC2

Отзывы: