Rain Bird ISDL-2400, Инструкция по установке, программированию и эксплуатации

Страница: 87 / 100

81 Integrated Sensor System
Data Logger installation continued...
NOTE: It is recommended that cable conduit and a
conduit fi tting be used to protect exposed wires.
(
Install cable conduit and fi tting underneath the Data
Logger, and route wire paths through the conduit and
up through the knock-out hole in the bottom of the
ISDL-2400 unit.
*
Connect the wires to the Ch 1 or Ch 2 posts and label
each wire clearly for future reference.
,
Set the internal ON/OFF switch to the ON position.
.
Confi gure the Data Logger and verify functionality
using the Programming the ISDL-2400 Data Logger
section of this manual.
GND
DATA
PWR
Wire Path
to Ch1
(1-9)
Wire Path
to Ch2
(a-i)
)
+
-