Bulldog ADV
Chapter 6
Accessories
© Raimondi S.p.a.
Via dei Tipografi, 11 - 41122 Modena (Italia)
Tel.: +39.059.280.888 - Fax: +39.059.282.808
www.raimondiutensili.it - e-mail: [email protected]
Use and Maintenance Manual
Page 35/44-6
6.2 Extension for the sliding surface
The 2 extensions for the sliding surface allow to have a firmer work bench at both infeed and outdeed improving the linearity
on long sizes and favouring the material loading and unloading operations.
6.1 OPTIONAL ACCESSOrIES
Remove the trolley from the machine. Approach the extensions to the frame, insert the screws (
A
) in their seats and tighten the
relevant nuts, but not completely. Assemble on the extensions the supporting legs (
D
) and completely tighten the screws (
E
).
To find the planarity between the machine plane and the extension plane, use a rule and act on the adjustable feet. Insert
the trolley on the guides. Position the striker (
G
) on the trolley bench and after verifying it is resting on the machine guide
(
C
), tighten it with the clamps (
h
). Perfect the extension position so that, by making the trolley slide, the striker (
G
) keeps
touching the machine and the extension guides (
C
). Once the right position is found, tighten the screws completely (
A
).
Check the correct assembly by making the trolley slide completely. If the trolley doesn’t slide properly, slacken the screws
(
A
) and repeat the above-described operations.
E
D
B
C
B
C
A
A
A
E
G
C
h
h
6.3 Tubular junction
This tool is used to combine 2 machines, as previously illustrated in chapter 4.8.
