mod. BULLDOG ADV - eD. 03/2014 - s. 04
© Raimondi S.p.a.
Chapter 2
safety rules
Page 10/44-2
machines & tools for the tile & stone professional
2.6
Position of the operator
The BULLDOG ADV series shall be used by one single operator, who
will have to stand sideways the machine and, by grabbing the trolley
handle, will be able to make half-bullnose shapings, bevels and “jolly”
(45° mitering) cuts in safe conditions and unstressfully.
During the working phase, the operator shall always stand in the front
part and grab the trolley handles with both hands.
The material shall always be leaned against the reference strikers
and well-clamped under the pressing devices.
CUTTING DANGEr.
ThE MAChINE ShALL BE TUrNED ON EXCLUSIVELY WhEN ThE OPErATOr IS IN ThE WOrKING
POSITION. ThE MAChINE ShALL BE TUrNED OFF AT ThE END OF EACh CUTTING OPErATION.
GETTING ThE hANDS CLOSE TO ThE GrINDING WhEEL WhILE IT IS rUNNING IS STrICTLY FOrBIDDEN.
2.7
Safety devices
The BULLDOG ADV series is equipped with the following safety devices:
1 ON/OFF switch
It allows for the start and stop of the machine. In case of potential danger,
the machine shall be turned off by means of the red OFF switch.
2 Tool guard
It prevents process water and debris from coming out of the cutting area.
3 Front door
It prevents water and debris, caused by cutting, from coming out of the
machine area.
2
rAIMONDI S.P.A. WILL NOT BE hELD rESPONSIBLE FOr DAMAGE CAUSED BY EJECTIONS rESULTING
FrOM SCArCE MAINTENANCE OF Or TAMPErING WITh ThE GUArDS, Or FrOM AN ErrONEOUS
POSITION
OF ThE OPErATOr (SEE PICTUrE ShOWING ThE POSITION OF ThE OPErATOr).
1
3
