mod. BULLDOG ADV - eD. 03/2014 - s. 04
© Raimondi S.p.a.
Chapter 4
Use of the commands
Page 24/44-4
machines & tools for the tile & stone professional
Materials with a width ranging from 200 mm (7
7/8”
) to 600 mm (24”)
In order to use this material size, the four short guides must be replaced with the long ones (
B
). Position the material to be
shaped onto the trolley perfectly rested against the frame slide (
E
) and against the rear support (
F
) of trolley. In order to
prevent the material from shifting, draw the black square (
G
) near it and lock it by knobs (
h
).
B
F
E
G
h
BEFOrE STArTING PrOCES-
SING, MAKE SUrE ThAT ThE
PrESSING DEVICE Or CLAM-
PS (I) DO NOT INTErFErE
WITh TOOLS Or PrOTECTI-
VE DEVICES.
Lock material by means of movable clamps (
I
) onto pressing device (
P
); they can slide on the black square, thus loosening
handles (
L
) and they can be adjusted according to material thickness by means of wing nuts (
M
).
L
I
M
N
Adjust the two wheels (
N
) and carry on processing the material.
AN EXCESSIVE LOCKING DEVICE PrESSUrE MAY CAUSE ThE DEFOrMATION OF ThE TrOLLEY AND
JEOPArDIZE ThE SLIDING MOVEMENT.
