mod. BULLDOG ADV - eD. 03/2014 - s. 04
© Raimondi S.p.a.
Chapter 4
Use of the commands
Page 22/44-4
machines & tools for the tile & stone professional
BEFOrE STArTING PrOCES-
SING, MAKE SUrE ThAT ThE
PrESSING DEVICE Or CLAM-
PS (I) DO NOT INTErFErE
WITh TOOLS Or PrOTECTI-
VE DEVICES.
Lock material by means of movable clamps (
I
); they can slide on the black square, thus loosening handles (
L
) and they can
be adjusted according to material thickness by means of wing nuts (
M
).
L
I
M
N
Adjust the two wheels (
N
) and carry on processing the material.
Materials with a width ranging from 70 mm (2
49/64”
) to 100 mm (3
15/16”
)
Position the material to be shaped onto the trolley perfectly rested against the frame slide (
E
) and against the rear support
(
F
) of trolley. Loosen side knobs (
O
) and extract 2 cm (25/32”) of steel square from below the black square and tighten them.
In order to prevent the material from shifting, draw the steel square (
G
) near it and lock it by knobs (
h
).
E
F
O
G
h
BEFOrE STArTING PrOCES-
SING, MAKE SUrE ThAT ThE
PrESSING DEVICE Or CLAM-
PS (I) DO NOT INTErFErE
WITh TOOLS Or PrOTECTI-
VE DEVICES.
Lock material by means of movable clamps (
I
); they can slide on the black square, thus loosening handles (
L
) and they can
be adjusted according to material thickness by means of wing nuts (
M
).
L
I
M
