RAIMONDI BIBULLDOG ADV, Руководство по эксплуатации и обслуживанию

Страница: 7 / 44

Bib Bib
Bib Bib
Bibulldo
ulldo
ulldo ulldo
ulldog
g
g g
g AD
AD
AD AD
ADVVVVV
Chapter 2
Safety rules
© Raimondi S.p.a.
Via dei Tipografi, 11 - 41100 Modena (Italia)
Tel.: +39.059.280.888 - Fax: +39.059.282.808
www.raimondiutensili.it - e-mail: raiutens@raimondiutensili.it
Page 7/44-2
Use and Maintenance Manual
2.2 Definition of safety-related terms
In this manual, the following terms will be employed as to safety:
Dangerous area each area within and/or close to the machine, where the presence of an exposed person
constitutes a risk for the safety and health of this person.
Exposed person anybody standing, either partially or totally, in a dangerous area.
Operator person in charge of the installation, operation, adjustment, maintenance, cleaning, repair,
transport of parts of the machine and all the other activities required for its operation.
Safety component component specifically designed by the manufacturer and sold separately from the machine,
aimed at ensuring safety. Consequently, the device whose failed operation jeopardizes the
safety of exposed persons will be considered as a safety component.
2.3 Correct use of the machine
BIBULLDOG ADV profiling machine is suitable for profiling edges on single- and double-fired ceramic tiles, porcelain gres,
marble, natural stone, Tuscan terracotta tiles, cement agglomerates.
THE MACHINE CANNOT BE USED FOR OTHER TYPES OF PRODUCTS WITHOUT PREVIOUS AUTHORIZATION
BY RAIMONDI S.P.A., WHICH WILL NOT BE HELD RESPONSIBLE FOR DIRECT OR INDIRECT DAMAGE
DERIVING FROM AN IMPROPER USE OF THE MACHINE.
Use
The machine is semi-automatic, the material feeding is set by human strength and so its feeding speed will have to be
proportional to the hardness and thickness of the material to be profiled.
The cutting of materials shall always be made with sharp grinding wheels and clean water, which shall always be present in
the tank in the required quantity.
THE MACHINE CANNOT BE USED FOR DRY PROFILING OR WITH INEFFECTIVE GRINDING WHEELS.
2.4 Characteristics of the machine
Type of grinding wheels to be used
A series of grinding wheels, suitable for the BIBULLDOG ADV machine, have been designed.
Diamond grinding wheel characteristics:
External diameter
115 mm - 160 mm (4
1/2”
- 6
5/16”
)
Hole diameter 20 mm (25/32”)
Maximum shaping thickness 30 mm (1
3/16”
)
Direction of rotation Counterclockwise
Rotation speed rpm
-1
4300