mod. BIBULLDOG ADV
© Raimondi S.p.a.
machines & tools for the tile & stone professional
Chapter 3
Handling, installation, adjustments
Page 16/44-3
In case the machine needs to be stored during idle periods, it shall be kept in covered premises, so that the machine can be
protected from bad weather, and free from aggressive chemicals .
Before storing the machine, disconnection from the mains and unloading of the cooling water tank is recommended.
The machine shall be stored in environments with adequate temperatures (from -10 to + 70°C) / (from 14° F to 158°F).
3.3 Power supply
The “BIBULLDOG ADV” profiling machine shall be supplied at the voltage corresponding to the value indicated on the “TECHNICAL
DATA” plate, the machine shall be connected to a line only with an effective ground cable. In case of doubt, do not connect the
machine. Connect the machine to a 16A so
cket
.
THE USE OF EXCESSIVELY LONG PATCH CORDS OR POWER SUPPLY WITH CURRENT GENERATORS,
MIGHT LEAD TO THE FOLLOWING TROUBLES:
1.
SLOW STARTING OF THE MOTOR AND SAFETY DEVICES INTERVENTION;
2.
MOTOR OVERHEATING WITH POWER DROP;
3.
THE SWITCHING ON-OFF DEVICE
DOES NOT WORK.
The “BIBULLDOG ADV” machine shall be connected to the mains equipped with a residual current circuit breaker (RCCB) or a
Class II isolation transformer, having the characteristics indicated in the table:
Transformer
230V - 50 / 60 Hz 1,1 kW (x2)
110V - 50 / 60 Hz 1,1 kW (x2)
RCCB
9 / 11A Id 30mA
17 / 21A Id 30mA
FOR THE CORRECT USE OF THE RESIDUAL CURRENT CIRCUIT BREAKERS
,
DO NOT FORGET TO CHECK
THEIR EFFICIENCY BY MEANS OF THE TEST BUTTON PLACED ON THE FRONT PART OF THE DEVICE
ITSELF.
IF THE MACHINE IS CONNECTED TO THE MAINS BY MEANS OF A PATCH CORD
,
THIS SHALL HAVE THE
FOLLOWING CHARACTERISTICS:
1.
MAXIMUM LENGTH 10 METERS (33’);
2.
HAVING A SECTION SUITABLE FOR THE LOAD;
3.
BEING COMPLETELY UNCOILED.
