Bib
Bib
Bib
Bib
Bibulldo
ulldo
ulldo
ulldo
ulldog
g
g
g
g AD
AD
AD
AD
ADVVVVV
Chapter 5
Maintenance interventions
© Raimondi S.p.a.
Via dei Tipografi, 11 - 41100 Modena (Italia)
Tel.: +39.059.280.888 - Fax: +39.059.282.808
www.raimondiutensili.it - e-mail: [email protected]
Use and Maintenance Manual
Page 31/44-5
5.4 Replacing the grinding wheel
TO CARRY OUT THIS OPERATION, WEAR THE PROTECTIVE GLOVES AND ACCIDENT-PREVENTION
SHOES.
Remove the plastic spray guard (
A
). Open the tank door (
B
). Insert the B8 hexagon wrench stem (
E
) in the relevant seat,
manually turning the grinding wheel to help the clutch.
A
B
Using a size 30 wrench (
C
), undo the grinding wheel fixing nut (
D
) by turning it clockwise. Fit the new grinding wheel and lock
it in place by turning the nut (
D
) counter-clockwise. Remove the B8 hexagon wrench (
E
). Try turning the cutter by hand to make
sure it has been correctly fitted. Refit the spray guard (
A
).
D
C
TO CARRY OUT THIS OPERATION, MAKE SURE THE MACHINE IS NOT CONNECTED TO THE MAINS.
E
