3b
3a
3c
Changing Switch Block Position:
Figure 4:
To change the position of the Switch Block, follow the steps below:
1) Remove the Switch Block by pulling it firmly out of the roadbed.
Remove the Switch Block Cover by sliding it down out of the roadbed.
2) Install the Switch Block into the other side by pushing it firmly into the
roadbed. Install the Switch Block Cover into the other side.
3) You will have to change the position of the Switch Block Lantern so that
the Green lenses align to the straight direction and the red lenses align
to the curved direction.
a) Hold the Switch Block Lantern between your thumb and forefinger.
Gently pull the Lantern out of its socket.
b) Rotate the Lantern 90 Degrees (one-quarter turn).
c) Press the Lantern back into the Switch Block. You will hear a "snap"
when it is in place.
1
2
8
Содержание RealTrax 0-42
Страница 5: ...5 1 2 3 4 5 Figure 1a...
