Remote Switch Wiring Instruction
You will have to wire the RealTrax O-42 Remote Control Switch to the
proper Screw Terminals. To do this, follow Illustration 2:
Figure 2:
(REMOTE SWITCH)
(SCREW TERMINAL
COVER)
!
Connect the GREEN wire of the REMOTE SWITCH to the Straight AC
SCREW TERMINAL (found under the removable SCREW TERMINAL
COVER).
!
Connect the RED wire of the REMOTE SWITCH to the Curved AC
SCREW TERMINAL.
!
Connect the BLACK wire of the REMOTE SWITCH to the ACG
(Common) SCREW TERMINAL.
!
The JUMPER between the fourth and fifth SCREW TERMINALS remains
in place.
Basic Switch Operation:
Now that your RealTrax Switch is wired,
you will be able to operate it via any of the
following methods:
Figure 3:
(1)
(2)
(3)
(3)
!
Remote Switch operation (1). Push the remote switch lever toward the
green light for ‘straight’ operation. Push the remote switch lever toward
the red light for ‘curved’ operation.
!
Manual (lantern) operation (2). Simply turn the lantern on the Switch
Block to align the points in the desired direction.
!
Automatic non-derail operation (3). If your consist enters the diverging
end of the switch, the points will automatically align to the correct
orientation (if necessary).
7
Содержание RealTrax 0-42
Страница 5: ...5 1 2 3 4 5 Figure 1a...
