20
4.2 Screen Display For Various Numbers Of Active Sensors
The MultiRAE family of instruments can display readings from one to six sensors (including dual
sensors), depending on the configuration. In order to maximize readability and the amount of information
shown, the display is automatically reconfigured, according to the number and types of sensors in the
MultiRAE.
If the configuration includes five sensors, and one of them is a PID, then the lamp value is shown, along
with the currently applied correction factor (CF) and measurement gas.
One sensor.
Two sensors.
Three sensors.
Four sensors.
Five sensors,
including Gamma
radiation sensor.
Five sensors,
including PID,
showing lamp
type, correction
factor, and
measurement gas.
Six-sensor
configuration with
CO+H
2
S combo
sensor.
When used in
TVOC mode,
MultiRAE Benzene
shows all sensor
readings
continuously
In benzene mode,
the display prompts
for snapshot
sampling.
Toggle Display is standard on MultiRAE
Benzene to alternate between LEL and VOC
reading and their CFs. ProRAE Studio II
allows other MultiRAE instruments to
toggle the display for PID and LEL readings
and CFs.
